| Representative List |
| Selmark Associates 100 Medway Road Suite 402 Milford MA 01757 Phone: 508-478-9088 Fax: 508-478-5145 Web Site: www.selmark.com E-mail: salesin@selmark.com Territory: MASSACHUSETTS |
| Authorized Distributor List |
| SMD 110 Daniel Webster Highway Nashua NH 03060 Phone: 603-897-0600 Fax: 603-897-0660 Territory: MASSACHUSETTS ARROW FUTURE ELECTRONICS Mouser Electronics NEWARK TTI PROJECTIONS UNLIMITED Digi-key Verical, an Arrow Division RS |
FREQUENTLY ASKED QUESTIONs
The lithium titanate battery (LTO) shares many characteristics with the lithium-ion battery. One difference is the LTO anode. An LTO battery uses lithium titanate oxide, while a lithium-ion battery uses carbon. By using lithium titanate, the battery has a significant performance improvement.
The SLB is a battery with long leads, just like a standard capacitor. The leaded profile allows for soldering directly to the circuit board using hand soldering or a select solder technique. Lithium Titanate batteries require an additional mounting bracket or holder placed on a circuit board. The Nichicon SLB (LTO) take less board space allowing them to be used in very compact or densely populated circuit boards.
LTO batteries are safer; they have an extremely small risk of ignition if there is a short. The SLB, Nichicon’s LTO battery, has superior charge and discharge capabilities, such as a 20C charge rate. Even higher rates are possible with pulsed discharges, like those used in telecommunications.
‘The SLB can withstand up to 25,000 charge/discharge cycles and have a lower cold temperature rating than a lithium-ion battery. And its low internal resistance allows energy harvesters to charge with weak currents without loss. They will not ignite if a short occurs. In addition to the advantages previously mentioned, the SLB comes in aluminum electrolytic case styles and size.
